€230.00
Model R3 by Leica is an automatic reflex camera with aperture priority. There is a twin measuring system in it. The selective measurement (explained on Leicaflex SL) can be replaced by an average one, which uses the two cells in the prism together with the spot cell. Thus you have three cells that work in average measuring. There is preponderance on the lower cell. You can switch from one mode to the other moving the white dot knob seen on the photo.
The electronic shutter is named CLS because of a co-operation between Copal and Leitz.
This body was made in collaboration with Minolta in Portugal
Production : 1976—1980.
Variations : R3, R3 mot, |R3 electronic.
Lens mount : Leica R bayonet
Focusing : Manual.
ISO range : 12-3200
Finder screen : Ground glass
Flash : Hot shoe / front contacts.
Flash speed: 1/90 sec.
Shutter : Electronic vertical metal blade focal plane shutter. 1/1000sec. to 4 sec
Metering system : TTL / selective integral system.
Exposure modes : Manual / aperture priority
Motor drive connection: Yes.
Battery : 2x silver oxide LR-44
Dimensions: 148x97x57mm
Weight : 770 gram.
Leica R3 motor winder (1978) it has single and continuous exposure up to 2 frames a second.
Battery pack is removable and can be switched for a spare one.
Push button electronic release .
5 pin cable socket for use of electronic remote controls.
Handgrip R3. For better control of the camera.
Tripod socket.
Out of stock
Camera :
Condition exterior : Good , normal users wear . Back seals are replaced
Condition mechanical : OK.Works on all speeds and modes
Number : 1492577
Finder : Clean and bright
Lightmeter : Working OK
Transport : Fine
Mirror : Nice
Selftimer : Good ( 10secs)
Motor winder R3.
Number: 26209
Mechanical: In good working condition , we have cleaned all the contacts .
External: with normal users wear.
| Weight | 2 kg |
|---|---|
| Dimensions | 25 × 20 × 20 cm |
| Condition exterior | |
| Condition mechanical | |
| Condition optical |
Leica Motor Winder R3 #14270 with grip #14272
