€320.00
A motordrive unit with built-in computer that functions in combination with a separate power unit. Can be switched between single frame or sequince photography at a maximum speeds of 5-frames-per-second. Incorporates the worlds first “shockles motor” to eliminate shock during motor start-up and stopping. Twin motors revolving in opposite directions virtually cancel out all vibrations. Provides for motor driven film rewind when used with the OM-4 and OM-3. Gives a graphic display indication of number of frames and operational status. Switching of the motor drive mode is done by the control on the power unit.
Specifications:
Compatible camera’s:
OM-4, OM-3, OM-4T ,OM-3T, OM-2sp , OM-2n , OM-2 , OM-1n, OM-1 , OM-40, OM-30 and OM-20.
Film advance : 5 frames per second maximum continuous filming without mirror lock-up as well as single frame advance.
Shutter speed : All availleble shutterspeeds (1/2—1/1000sec only in sequince mode with OM-1).
Power supply : M.18volt control grip 1,2 (12 AA batteries) M.15volt NI-Cad control pack 1,2 ( rechargeable ) M.AC control box.
Input voltage : DC 18 volt ( AA batteries ) 15 volt (NI-Cad) 12—16 volt (large potentiality DC power supplies)
Auto film positioning : The film automatically advances to the shooting position as soon as the camera back is closed (with OM-4, 3 OM-2sp , 40, 30 and 20.)
Auto rewinding : The motor automatically stops when rewinding is completed (with OM-4 and OM-3)
Frame display: Digital LCD display subtractive counting : two SR44 or LR 44 batteries provide power for the LCD display.
Weight : 360 grams.
Olympus M.15V Ni-Cd Control Pack 2.
This is a flat type rechargeable power source with a special built-in Ni-Cd battery. It can be attached to the Motor drive 1 or 2 directly or via a relay cord. It provides a Mode Selector Dial ( with Single, Sequince and OFF positions) for control of the Motor drive. The extra shutter release button on the rear is especially convenient during vertical format photography. On a full charge the control pack can shoot about 20 rolls of 36 exposure film . ( when used with the OM-3 ,4 and motordrive 2)
Specifications :
Type : Flat type , rechargeable power unit for motordrive 2 and motordrive 1.
Battery : Built-in dedicated Ni-Cd battery.
Recharging : Dedicated M.15 volt Ni-cd charger unit.
Recharging time: 4—5 hours.
Voltage : 14,4 volt.
Number of rolls exposed: about 20—36 exposures rolls with motor drive 2 . About 40 –36- exposures rolls with motor drive 1.
Motordrive attachment : Direct attachment gy tightenning screw. Provided with a direct contact : Relay cord useble.
Selection of film advances modes : Single , Sequince and Off by dial switchower endless, pull-up type dial.
Release Button : Pushbutton with lock.
Battery check : Pushbutton battery checker and 3—level LED display.
Weight : 260 grams.
Olympus M.15v Ni-Cd Charger 1. ( 220 volt.
This charger is needed to Charge the Olympus M15v Ni-Cd Control Pack ½ . Charging time for full capacity is 4-5 hours.
Spec:
Type : Charger exclusively for use with M.15v Ni-Cd control Pack ½
Supply circuit : AC 100/115/220 or 240 volt 50/60 Hz. Voltage selection via clamping screw.
Electrical connection: AC mains, Plug-in type body, snap-on type special mount plug with 1 m cord.
Charging time : 4-5 hours for full charge.
Dimensions and weight : 66x49x42mm. 260 gram.
In stock
Condition:
Nr motor drive 105776
Motor drive 2 with normal users wear, the drive operates on all modes set and reset buttons work fine, the light of the display works . Display is fine.
Nicad control pack 2 , the batteries are replaced with a new battery pack and works fine keeps it charge OK. Smal part is missing see pictures.
M15v Nicad charger 1. 110volt this charger is fine. If desired we provide a 200 to 100volt converter.
| Weight | 2 kg |
|---|---|
| Dimensions | 25 × 20 × 15 cm |
| Condition exterior | |
| Condition mechanical |
Olympus M. AC Control Box. for use with Olympus Motor Drive 1 or 2.
